Tannoy Eyris R Sycamore Rear AV Speaker Tannoy Eyris R HF Unit Double-vented neodymium magnet system ensures smooth and detailed high frequency reproduction without sibilance or harshness by eliminating diaphragm air compression, which causes disturbing audible distortion products. Extended wideband frequency response to 50kHz ensures phase linearity within the aural frequency band ensuring optimum time and transient responses. 25-micron titanium dome thickness preserves maximum stiffness to mass ratio for extended bandwidth and phase linearity. Wide dispersion and linear off-axis time and frequency responses reduce the effects of listening room absorption variations. Fully enclosed neodymium magnet provides total magnetic shielding. Bass driver Cone materials carefully selected from multi fibre paper pulp mixes; chosen for fast, tight, bass with superb transient response and natural, open midrange quality. Custom designed high stiffness cast alloy driver chassis provide rigidity and mechanical isolation, ensuring fast transient speed and low colouration. Vented suspension exhaust system prevents local air compression within the drive unit motor system to give low distortion and perfect control of the drive unit mechanical Q factor. Magnetic system design uses 2 separate magnets and a high permeability local surrounding shielding path. Very high level of linear excursion allows increased bass power output with excellent transient behaviour at all power levels. Bass drivers braced using the unique Tannoy damped coupling system through to the cabinet mass to control vibration energy. Ten screw chassis mountings eliminate vibration and ensure perfect cabinet air sealing. Unique copper clad aluminium ribbon wound voice coils provide ultra linear drive, controlled motional impedance, high power handling and maximum sensitivity in the mid-band. Crossover Low order crossover slopes ensure true phase linearity. Minimum components in the signal path ensure transparency and aural separation. High quality low loss components, point to point hard wired for maximum information transfer. High purity oxygen free copper internal wiring provides transparency and detail. Unique bi-wire terminal panel incorporates custom WBTTM terminals to eliminate contact conduction distortion. Drive unit earthing, or grounding, reduces radio frequency interference within the feed signal and ensures perfect separation between notes, greater transparency and controls sibilance at higher frequencies. Additional features High rigidity cabinet design with extensive internal bracing eliminates vibration induced time smearing. 30mm thick front baffle panel provides a rigid driver platform ensuring reduced colouration with greater speed, width and impact in the sound stage. Driver configuration optimised for a flat response at the listening position. ntegrated wall hanging and signal cable linking system utilises professional grade connectors providing maximum convenience and performance.

Model: Eyris R

£199.99