Designed to partner the rest of the Mercury F Custom range in a variety of home theatre system configurations, the FC Custom centre channel speaker is voiced to ensure clarity, tonal balance, coherence and well focussed imaging and effects across the front soundstage.

A compact and solidly constructed speaker, the FC Custom is shielded to prevent colour fringing effects when placed close to screens.

Main Features:
The Mercury F Custom series loudspeakers utilise materials and components carefully selected to optimise the system performance. Dense wood material used for the cabinet construction, including a substantial MDF front baffle, provides the essential cabinet rigidity required of a good loudspeaker design. The bass and treble units are solidly built providing exceptional acoustic performance and long-term reliability.

The Mercury FC Custom upgrades deliver excellent sonic enhancements:
Crossover - the crossover components have been upgraded, including a high quality polypropylene capacitor used in the tweeter feed, and the circuit topology revised to deliver greater high frequency detail, better imaging and more control at the bottom end.
Wiring - the internal wiring has been replaced with high purity Van den Hul silver plated cable for lower energy loss and greater transparency.
Termination panel - the termination panel has been upgraded with high quality gold plated brass terminals to optimise the signal transfer with minimum information loss.
The bass performance is clean and precise while the mid and high frequency presentation is accurate, clear and dynamic. This natural sounding acoustic balance allows the Mercury FC to reveal all the centre channel detail of original soundtracks with an expansive front soundstage of dept and presence, this as well as delivering the subtle nuances of complex multi channel audio recordings. One listen and you'll know precisely what we're talking about.

Specifications: * Recommended amplifier power 10 - 90 Watts RMS * Continuous power handling 70 Watts RMS * Peak output power 140 Watts * Low frequency response 68Hz * Sensitivity 90dB * Nominal impedance 8 ohms * Frequency response 38Hz - 20kHz

DRIVE UNITS * High frequency 25mm (1.00") Nitro-Urethane layer damped woven polyester dome, shielded neodymium magnet assembly * Low frequency 2 x 100mm (4.00") coated multi-fibre paper pulp cone

CROSSOVER * Frequency 2.7kHz * Type 4th order acoustic linkwitz-riley

CONSTRUCTION * Enclosure type Front reflex.15mm (0.59") particle board, internally cross-braced enclosure * Shielding Yes * Volume 5.3 litres (0.2 cubic feet) * Dimensions 150 x 430 x 170mm (5.75 x 16.75 x 6.75") * Weight 5.3kg (15.2lbs)

5 Year Warranty

Model: Tannoy Mercury FC Custom Oak

£69.99